Project Description

EVQ200
EV200 electrical vehicle DC contactor, continuous current 200amps, DC 12-900V, contactor coil 12/24V, 48/72V
EVQ200
EV200 electrical vehicle DC contactor, continuous current 200amps, DC 12-900V, contactor coil 12/24V, 48/72V
High voltage DC contactor, normally open (SPST-NO), 200 amps rated load current, available with 12V/24V, 47/72V coils.
It’s widely used in charging station, fast-charge contactor as EV contactor in EV, HEV, photovoltaic, energy storage, AGV, UPS, etc.
- Epoxy sealed.
- Magnetic arc blowout.
- Compact design, low noise.
- Build-in energy saving board
- Bi-directional, optional with polarized or non-polarized contact.
- Optional auxiliary contact.
- CE, CCC and RoHS compliant.
EVQ Series Contactors can switch DC loads at both low and high voltage from 12 to 900VDC. These hermetically sealed contactors can be mounted in any position, can be used in nearly any harsh environment at temperatures from –40°C to 85°C. They are the preferred contactor (sometimes called a relay ) for electric vehicles, hybrid vehicles,heavy trucks and equipment, busses, emergency vehicles, boats, LRT, mining, power management systems for battery charging, fuel cells, battery backup, photovoltaic, wind and wave power systems where long life and high reliability are needed.All EVQ Series contactors meet RoHS and CE,CCC Conformance requirements.
Parameters | ||||
---|---|---|---|---|
Contact arrangement | SPST-NO | |||
Main contact Parameter | Rated load voltage (Ue) | 12-900Vdc | ||
Rated load current | 1-200A | |||
Max continuous themal current | 300A 900sec | |||
400A 200sec | ||||
Max.switching current 1 time only | 2000A 320Vdc | |||
General Data | Initial contact resistance | 1mΩ Max.(at 1A) | ||
operate time(at 20℃) | 25ms Max. | |||
Bounce time(at 20℃) | 7ms Max. | |||
Release time(at 20℃) | 12ms Max. | |||
Electricity life | With polarity | DC450V,1x104times DC750V,1x103times | ||
Without polarity | DC450V,1x104times DC750V,1x103times | |||
Mechanical Life | 2×105 | |||
Insulation | Insulation resistance | Initial:100MΩ Min. | ||
Life End: 50MΩ Min. | ||||
Dielectric strength | coil to contact | AC 2500 Vrms/1mA/1min.(At sea level) | ||
contact to contact | AC 2500 Vrms/1mA/1min.(At sea level) | |||
Mechanical function | Shock resistance | 20Gpeak value,11ms 1/2sinusoid(coil power setup) | ||
Vibration resistance | 20Gpeak value,80~2,000Hz,sinusoid | |||
Coil parameter | Nominal voltage | 12-36Vdc | 48-72Vdc | |
Coil Power (W) | Start current:3.8A Retentive power: 2W | Start current:1.3A Retentive power: 2W | ||
Coil polarity | √ | |||
Auxiliary contact option | √ | |||
Mounting & Connections | M8 Male thread/M6 Female thread | |||
Environmental parameter | Ambient Temperature | -40~+85℃ | ||
Relative Humidity | 5~95% RH. | |||
Dimension | 80.5x65.2x72mm | |||
Weight ( g ) | 430±10g |